ERGOMETRICS

The Target Tab

With the “Target tab” ERGOMETRICS users link fixed or variable targets to the “Target Tab” on the gauge and track performance within performance boundaries and also against the precise target.

With the ability to pre-load metric values using the Import function, these can be linked to the “Target Tab” on any gauge, this means that performance can be tracked against the variable target.

A fixed target can also be set when designing the gauge so that only one entry needs to be made for that type of target tracking.

The “Target Tab” can be colored as required.

To get the best from this feature ERGOMETRICS users should locate the target within the green sector of the gauge. This means knowing what each period’s target will be during the design phase and setting the beginning of green sector at slight less than the minimum target value and the end of the green sector at slightly more than the maximum target value.  The “Target Tab” will be positioned exactly where it has been set for the viewed period.

Sample showing “Under Target”, “On Target” and “Over Target”. The target for this gauge is variable and has been set by linking to a metric.  Two metrics have been used “Budget Target” and “Budget Actual” – the gauge reports “Budget Actual” and tracks this against the variable “Budget Target”.